Place the installation template at the desired handle height.
Mark the holes to be drilled and drill the marked locations.
1)
2)
4
2
Drill Holes on the Door
Desired handle height
Back
set
Center line of handle
60m
m
Change the Handle Direction (if needed)
C.
Remove the directional screw of the handle, rotate the handles of the outdoor and
indoor units to 180 degrees in the left or right direction, depending on the door.
1)
Secure the handle again with the directional screw.
2)
Door thickness
45 to 60mm
Note
:
Before changing direction, please make sure the Security Knob is at the right side.
