5
18~26dBm.
Wiegand Setting: Set the machine's wiegand output format.
Setting Wiegand Out Bytes: Sets the forward or reverse output of the machine's Wiegand
Data, and start output from the first few bytes.
Read Tag Interval Time: Set the machine to read the card interval. Read card interval is the
time when from the card is read within the scope of the card to the card is left out of the
scope of the card to read the second time card.
6. Access to Software
RJ45 Connection
Connect the RJ45 port of the Standalone Terminal to the Ethernet port of the computer. The
machine supports access to ZKAccess 3.5.3 build 0009 and ZKBioSecurity 3.0.5.0 software.
6.1. Access to ZKAccess
1)
Add Device:
Search the
Standalone Terminal
Click [Device] > [Search Panels], click [Start Search] to search the Standalone Terminal by TCP/IP.
Standalone Terminal
