DEMO
Configuration
Via the demo,user can set output power ,working frequency and data output format for card issuer, also
can write and read data information of UHF cards.
Notes
1.
Though the demo can read and write EPC Area and User Area datas of UHF card, UHF reader just read
EPC Area data and output the card number.
2.
After the DEMO settings are completed,
disconnect the demo ,then
you need to wait for 1s to use the
text or document to obtain data.
3
.In order to prevent duplication of read card, you should leave the card area about 1s to swipe again.
4
.Reading card successfully once ,the prop tone alarms once and flashing green light.
5
.Opening any text or taking a typewriting window as the current window,the cards number will be
displayed in the window.
6
.When the power is on, the buzzer rings about 400ms,while swiping cards,the buzzer rings about 200ms.
7
.The card issuer outputs the EPC byte .(TID/USER (initial address) implemented later in the upgrade.
ZKTECO CO.,LTD.
www.zkteco.com
E-mail: sales@zkteco.com
© Copyright 2017. ZKTECO CO.,LTD. ZKTeco Logo is a registered trademark of ZKTeco or a related company. All other product and company names mentioned are
used for identification purposes only and may be the trademarks of their respective owners. All specifications are subject to change without notice.
All rights reserved.
