ZK-MD6000 Series
User Manual and Installation Guide
P a g e
| 9
Copyright © 2022 ZKTECO CO., LTD. All rights reserved.
temperature measurement, real-time monitoring, entrance control, face
and RFID verification, ambient gas detection.
Instructions to Pedestrians:
1)
A line must be drawn at 50cm away from the detector. The
pedestrians must pass through the detector one-by-one.
2)
Pedestrians should line up one-by-one to ensure the smooth
operation of the detector.
3)
Pedestrians should walk at their normal speed. They must not
intentionally form a crowd, rush, walk slowly, or crush the door panel.
4)
Before passing through the metal detector, the pedestrians must
remove all the carried metal objects (such as keys, mobile phone,
watch, coins, etc.), and place it on the security chute or a table, and
pick them up after the security check.
5)
After the pedestrian verifies the identification successfully, the
turnstile will open. The pedestrian needs to wait about 3 seconds, and
the device will automatically measure the temperature of the
pedestrian.
6)
If the detector alarms when someone passes through, it indicates
there is/are some metal object(s) hidden in the body. The security
guard can use a hand-held metal detector to accurately detect the
hidden position according to the alarm zones.
