ZK-MD6000 Series
User Manual and Installation Guide
P a g e
| 7
Copyright © 2022 ZKTECO CO., LTD. All rights reserved.
1
Note
PLEASE READ THE FOLLOWING INSTRUCTION CAREFULLY BEFORE
OPERATION:
1.
This walk through metal detector can be used indoors, and be
careful to avoid long-term outdoor work affecting the service life of
the equipment.
2.
It must be used in an indoor environment with a temperature
between 10°C and 35°C.
3.
To avoid the thermal imaging temperature measurement function
malfunctioning, do not operate in an environment where the
reflection or light is not strong enough to affect face recognition.
4.
Choose a stable installation location to avoid false alarms caused by
excessive shaking of the product.
5.
Make sure that there are no large metal objects or strong magnetic
fields within 2 meters of the detector.
6.
Before installation, make sure that the left and right door panels are
placed at the correct location.
7.
Please tighten the bolts and screws of the connection part of the
product to make sure that the overall installation is stable and free
from shaking.
8.
Please check if the product wiring is properly connected and not
loose.
9.
The operating frequency cannot be the same when multiple
products are installed and used simultaneously.
