ZK75 Series User Manua
l
25
4.
Default All
This button sets the reader with the default configuration parameters (the default factory settings). The
settings take effect immediately. The default parameters affect all reader configurations settings.
5.
Close
Close this dialog and return to the Home Menu Page.
General Settings
This group of configuration settings defines the basic operating parameters of the reader.
1.
MSR Reading
This option will turn on or off the MSR. If MSR is disabled no data is sent out to host in any case. The default is
MSR Reading Enabled.
2.
Decoding Method Settings
This option gives four kinds of decoding methods.
Raw Data (output in both forward and reverse directions)
Decoding in Both Directions (forward and reverse reading)
Decoding in Forward Direction only (card entering slot from LED end)
Decoding in Reverse Direction only (card entering slot from end opposite LED)
With the bi-directional operation, the user can swipe the card in both swipe directions and the data
encoded on the magnetic stripe will be output. In the single swipe direction selections, the card can only be
