ZK 75 Series User Manual
40
9.
Click “Set All Default” button to show default setting, the Default table is
Character Type
:
USA
Command Type
:
EPSON/EURPOPE
Baud Rate Setting
:
9600/n/8/1
Pass-through Mode
:
None
Welcome msg line1
:
*** VFD DISPLAY ***
Welcome msg line2
:
**HAVE A NICE DAY AND THANK YOU **
7. Welcome Message
Welcome Message line1 maximum 20 characters, line 2 maximum 20 characters, total of 40 characters.
ASCII mode
You can type the character by keyboard (0x20h ~ 0x7Fh), if you press clear icon, it will clear the all Message
characters on AP.
Hex mode
Hex mode can define the character from 0x20h to0xFFh
,
the range 0x80~0XFF which depends on the code
page table.
Like the first character (0x80)
,
in default code page will show on VFD module.
8. Click “
Download setting to VFD
” button
This button is to download the setting from VFDset.exe to VFD module. After success dialog “Download O.K!