X-Ray Inspection System
User Manual
P a g e
| 9
Copyright©2021 ZKTECO CO., LTD. All rights reserved.
1
Important Safety Precautions
The X-Ray Inspection System works as per the safety regulations. To ensure the safety of
users, read this manual carefully before operating the system.
Safety Standard of Imaging Films
The imaging films used in our X-Ray Inspection System adheres to ISO1600 safety
standards.
Safety Checks before Power-on
Before the power is turned-on, make sure to carry out the following safety checks:
1.
Check the lead film, do not operate the system if the film is broken or there is any
gap.
2.
Check if the photoelectric sensor is blocked.
3.
Check if the transmission belt is deviated or stuck; ensure that there is no spike or
filth.
4.
Check if there are flaws on the Shell, Monitor, Console board and cable.
5.
Ensure that the cover plate is properly installed.
Basic Safety Rules
To ensure safe operation of the X-Ray Inspection system, follow the safety rules given
below:
1.
The Operator must know the relevant radiation protection rules and all the safety
instruction rules.
2.
If you had not used the system for more than 6 months, check carefully before
operating.
3.
Only the professional technician is allowed to perform installation, circuit
connection and replacement of electrical components.
