X-Ray Inspection System
User Manual
P a g e
| 42
Copyright©2021 ZKTECO CO., LTD. All rights reserved.
5)
Flip vertically:
Vertically flips the scanned parcel images in the main interface.
6)
Show blank space between object images:
Adds blank areas between the
scanned parcel images so that operators can clearly identify the parcel images
scanned before and after.
7)
Default absorptivity index:
Absorptivity can be used to show the details of objects
in different materials and thicknesses in the image. Variable absorptivity still keeps
certain contrast beyond the absorptivity range. This function can brighten/darken
the whole image (similar fine tuning of high/low penetration). The lower the
absorptivity level, the brighter the image will be, so decrement effect will be
effective in the opposite way. The levels of the system setting are 50, i.e., -25 to +25.
Brightening corresponds to the "absorptivity-" and darkening corresponds to the
"absor" on the keyboard.
User Management
By using this function, the administrator can add and manage operators, reset the
operator passwords, etc by himself. The software is designed to support two-level
authority by default, in which the authority of administrator is greater than that of the
operators and operators can only change the information in their own accounts.
Note:
The user name shall not exceed 6 digits, i.e., 1-999999.
The password shall not exceed 8 digits, i.e., 1-99999999.
The default password for a new account is 123456.
