Shanghai ZLAN Information Technology Co., Ltd Tel: +86-17321037177 http://www.zlmcu.com
14
Figure 6 DIN RAIL
4.2 Hardware connection
Generally speaking, the serial device server only needs to connect power supply,
serial port and network cable.
The power supply can adopt configured 12V power adapter or 2-wire power
supply on site, which can be directly connected to plus or minus terminals of the
power supply.
The serial port needs to be connected according to the user's serial device. If the
user RS232 device is used, the DB9 male or female head shall be considered. If
the male head is used, the standard RS232 female to female crossover line can
be adopted to connect the serial port server and the device. If the user device is
an RS485 device, connect the positive 485 to TA and the negative 485 to TB.
The Ethernet port connects with normal network cable, can directly connect to the
computer or connect to the network through the switch.
4.3 Software Installation