CANDTU-200UWGR
CAN Bus Message Recording and Wireless Data Transmission Equipment User Manual
©2021 Guangzhou ZLG Microelectronics Technology Corp.,Ltd.
22
User Manual
The LIN data length can be set.
4.2.5 DO Configuration
Figure 4.12 and Figure 4.13 show the DO interface configuration items.
Figure 4.12 DO Configuration tab
Figure 4.13 GPS area setting
1) Channel enable
Selected: Enable the corresponding DO channel.
Deselected: Disable the corresponding DO channel.
2) Triggering event
Record full. Trigger output when the SD card is full;
Bus error. Trigger output when the CAN bus is faulty;
Trigger output when the SD card is abnormal or does not exist;
In GPS area, trigger output when the device is outside or inside the specified
GPS area.
3) Relay actions
Closed: When an event is triggered, the relay closes.
