CANFDNET-400U
High-Performance Four-Channel CANFD Bus-to-Ethernet Converter User Manual
©2021 Guangzhou ZLG Electronics Technology Co.,Ltd.
37
User Manual
Continued
Categ
ory
Name
Default
Description
CAN
port
config
uratio
ns
Subnet mask
1
255.255.255.0
The subnet mask determines whether the host number
of the network and whether the host number is legal,
such as the network segment 192.168.1.x. If the subnet
mask is 255.255.255.0, the IP 192.168.1.255 is a
broadcast address and cannot be used to represent a
host.But
if
the
subnet
mask
is
255.255.0.0,
192.168.1.255 is an illegitimate device address
Start address
1
192.168.0.55
Only valid in TCP Client and UDP working modes. It is
used to define the destination IP address; that is, the
port IP address of the network device that
communicates with the CANET device (it can also be
the starting IP address in the IP address segment), or it
can be a domain name.
End address 1
192.168.0.55
Only valid in TCP Client and UDP working modes. Used
to define the end IP address in the IP address segment.
If there is only one destination address, the end address
can be the same as the start address.
Note: If the IP address segment is filled in the end
address, multiple network devices will communicate
with CANET-8E-U at the same time.
The first three
bytes of the IP address segment must conform to the
subnet mask 1 limit, and the fourth byte of the ending
address must be greater than or equal to the fourth byte
of the starting IP address.
Destination
ports 2-6
0
The value ranges from 1 to 65535. The function is the
same as the destination port 1. To enable it, set the
number of TCP connections.
Subnet masks
2-6
0.0.0.0
Disabled by default. To enable it, set the number of TCP
connections
Start
addresses 2-6
0.0.0.0
The function is the same as the starting address 1. To
enable it, set the number of TCP connections
End
addresses 2-6
0.0.0.0
The function is the same as the starting address 1. To
enable it, set the number of TCP connections
