CANFDNET-400U
High-performance Four-channel CANFD Bus to Ethernet Converter User Manual
©2021 Guangzhou ZLG Electronics Co., Ltd.
15
User Manual
Figure 5.8 "CAN(FD)-to-Ethernet" configuration interface
1. Work mode: Set the work mode of the device, "TCP server", "TCP client", or "UDP".
2. Local port: Set the local port of the device. When it is set to 0, it will be assigned by the system by
default.
3. Destination address: In TCP server mode, you do not need to configure the destination address; in other
modes, the destination address is the address of the remote TCP server or UDP.
4. Destination port: In TCP server mode, you do not need to configure the destination port; in other modes,
the destination address is the port number of the remote TCP server or UDP monitoring.
5. Enable forwarding configuration: After configuring the parameters, select the leftmost check box of the
current configuration item.
5.5.4 Downloading Configurations
After modifying the configuration parameters, enter the password (default: 88888) in the "Current Password"
option box of the configuration item "Password Operation", as shown in Figure 5.9. Click the "Submit Changes"
button at the top of the configuration parameter interface to download the configuration to the device.After the
configuration is modified successfully, the "Modified successfully" message appears, as shown in Figure 5.10.
