Zlin Aviation
Section 1
Maintenance Manual Aircraft Maintenance Manual
Issued: 01/02/2006
QAP-AMM-Rev02
Date of latest Revision: 23/01/2013
Page Number: 1-35
Landing gear
Level of
certification
1
If it is found the tires are wearing unevenly , reverse them with the
aim of evening up the wear rate.
LSRMA
2
Verify the main gear clamping bolt attachments are secure.
LSRMA
3
Verify tire pressures are correct.
LSRMA
4
Check braking action. If required purge (bleed). Ensure hydraulic
reservoir oil level is correct. Check wheels bearings
LSRMA
5
Check tail wheel connections for excessive free play or faults.
Lubricate junction pin.
LSRMA
Controls
Level of
certification
1
Check pedals and control stick condition.
LSRMA
2
Lube the crank located behind the rear seat.
LSRMA
3
Control all controls. Free from any excessive play.
LSRMA
