Zlin Aviation
Section 1
Maintenance Manual Aircraft Maintenance Manual
Issued: 01/02/2006
QAP-AMM-Rev02
Date of latest Revision: 23/01/2013
Page Number: 1-44
1.3.5 Control surfaces
For rudder and elevator, see section “Empennage”.
Ailerons and flaps are of traditional metal sheet riveted construction. Ailerons are cable actuated
with the cloche, while flaps are mechanically actuated with a Bowden, by moving the flap lever
located on the side of the seat, on the floorboard.
The flap lever has a spring latch system that holds
the flap in the selected position.
NOTE:
no major repair or alteration, as outlined in ASTM 2483, are authorised at this time. For
eventually obtaining engineering approval for any major repair or alteration, contact Zlin Aviation.
For metal sheet repair see 2.3.3.1.
For control cables and pulley control see 2.3.2.1.