22
Designer Hood Installation
DESIGNER ISLAND HOOD INSTALLATION
Please unpack your range hood when it is delivered and inspect to ensure all parts
are included.
PARTS SUPPLIED
NOTE:
Wall range hoods with single motors will come with a square to 6˝ round
transition piece and will include a back draft damper. The ducting with these range
hoods is 6˝. Dual motor wall hoods will come with a square to 8˝ round transition
piece without a back draft damper. The ducting with these range hoods is 8˝ in
diameter.
Use rigid ducting wherever possible. Try and minimize the use of elbows. More
elbows and longer runs create higher static pressure. No more than two to three
elbows are recommended. Use 40 feet of ductwork max. The hood comes with a
grounded three prong plug that can be plugged into a 20 amp circuit.
1. Main Hood with All Lights and
Button Banks Pre-Installed
2. Chimney
3. Transition Piece (for 6” or 8”)
4. Baffle Filters
5. Flexible Duct (for 6” or 8”)
6. Packet of Screws and Anchors
7. Top Mounting Bracket
8. Crown Molding Bracket
9. Crown Molding
10. Grease Cup
Screw: F
Screw: H/I
Screw: H
Screw: G
Screw: A/C/D
Summary of Contents for 697-R-30
Page 38: ...31 Insert Installation INSERT INSTALLATION Installation Tutorial Video 36 30 36...
Page 52: ...45 Single Motor Electrical Diagram SINGLE MOTOR ELECTRICAL DIAGRAM CHANGING PARTS...
Page 53: ...46 Double Motor Electrical Diagram CHANGING PARTS DUAL MOTOR ELECTRICAL DIAGRAM...
Page 103: ...Installation Guide and User Manual 1 614 777 5004 1 1 0 www zlinekitchen com...