4
6
7
8
9
Slide chimney over the angle iron
s
and place in position on top of
the hood. Pull the electrical plug to
the top of the chimney
.
Lift the hood to attach the angle
iron
s
to the ceiling bracket. Use
screws pro-vided to attach.
Chimney
should be cut 2.5in short to allow
for screwing angle irons into
bracket.
Make
your electrical and
ducting connections. Use rigid duct
wherever possible. Try and minimize
the use of elbows. More elbows and
longer runs create higher static
pressure. The hood comes with a
grounded three prong plug that can
either be direct
ly
wired or plugged
into a 20 amp circuit.
Slide
crown molding
over the
crown molding
bracket on the
ceiling
.
Remove plastic wrap from all sides
and i
nstall stainless steel baffle
filters.
Before installing baffle filters, make sure that you
insert the grease cup under the motor blower.
10
