16
Car
e and Maintenance
CARE AND MAINTENANCE
To keep the product clean and shiny, follow the steps below:
1. Rinse clean with water and dry with a soft cloth.
2. Do not clean with soaps, acid, polish, abrasives, or harsh cleaners.
3. Do not use any cloth with a coarse surface.
4. Clean the aerator at the end of the faucet of any debris.
Note:
Do not over tighten screws/nuts on your tub filler. Finger tighten, then use a
wrench/screwdriver as needed to tighten until snug.
