• Use the hammer to fit the anchors (8).
• Fit the brackets (7) into their places, using 4 screws for each.
You must use all of the 2 brackets to ensure safety of the product.
If you are not sure whether the existing connection parts are fit to the
wall as securely as they should be, you can use alternative anti-tip
methods.
If there are cabinets at the back wall of the refrigerator, please make
sure that the cabinets are fixed to the wall. For this, you need to be sure
that the back wall of the cabinets are fixed to the concrete back wall
with suitable connection parts.
WARNING
Alternative anti-tip method:
If the anti-tip brackets cannot be connected securely, you must use the alternative
method below. In this method, you can use wooden blocks to avoid the risk of tipping
over.
It must be installed as illustrated in the figure below.
There must be no clearance between the product and the wooden block.
Minimum section dimensions of the wooden block must be 3"x4" (75 mm x 100 mm).
Width of the block must be equal to the clearance where it will be installed.
An additional block must be used if the niche depth is more than anticipated. The
wooden block must contact the product with a maximum size of 2" (50.8 mm).
To determine the location for the wooden block, mark it on the rear wall, select
suitable screws and connect safely.
Number and type of the screws to be used for the wooden block must
be determined so there is a secure connection.
WARNING
INSTALLATION
INSTALLATION
35
36
Anti-Tip Br
ack
ets
Anti-Tip Br
ack
ets
Summary of Contents for RBIV-30
Page 1: ...BUILT IN REFRIGERATORS www zlinekitchen com Installation Manual...
Page 13: ...RBIV 30 RBIV 36 INSTALLATION INSTALLATION 19 20 Product Specifications Product Specifications...
Page 14: ...RBIV 36 INSTALLATION INSTALLATION 21 22 Product Specifications Product Specifications...
Page 44: ...zlinekitchen com 1 614 777 5004 contact zlinekitchen com 2 0 0...
