20
INSTALLATION
STEP 2: SURFACE BURNERS
To replace the orifices of the surface burners, lift up the burners and unscrew the orifices
shipped with the range top using a 7 mm socket wrench.
Replace orifices using the conversion set supplied with the range top. Each orifice has a
number indicating its flow diameter printed on the body. Consult the images starting on
page 16 for matching orifices to burners.
NG = Natural Gas
LPG = Liquid Propane Gas
NG
LPG
7 mm
7 mm
Step1
Step 2
Step 3
Step 4
Step 5
NOTE:
For the dual burner, the orifice is located on the side of the burner. Use a 7 mm
boxed end wrench to remove and tighten.
Scan to follow along with a video.
Gas Con
ver
sion Pr
ocedur
e