background image

WARRANTY

COVERAGE

ZLINE Kitchen and Bath (“ZLINE”) range tops have a one year parts and service warranty and 
a limited lifetime warranty on burners, which includes parts and labor for spark tips. 

ZLINE warranty periods begin from the original purchase date of the product and solely cover 
the original purchaser of the product, delivered new and in its original carton. The limited 
warranty covers all parts and labor for necessary repairs if any part of the product, or the 
product itself, proves to be defective in materials or workmanship. The product must be deemed 
serviceable via troubleshooting with the ZLINE Customer Experience team. All service on 
ZLINE products under warranty must be performed by ZLINE-approved and ZLINE-certified 
service providers unless otherwise specified by ZLINE. Service will be provided during normal 
business hours. Products must be unobstructed and accessible to the service provider at the time 
of service. ZLINE’s liability is limited to the original purchase price of the product. Additional 
injuries, losses, damages, or other inconveniences caused by product malfunction or defects in 
materials are not covered under the terms of this warranty.

TERMS

ZLINE warranties apply only to the original purchaser of a ZLINE product installed for normal 
residential use. This is defined as a single-family, residential dwelling in a non-commercial 
setting. Any warranty claim stemming from installation, operation, or any other use within a 
commercial setting is not covered under this limited warranty. Commercial settings include, 
but are not limited to: schools, churches, hotels, restaurants, vacation rentals such as Airbnb, 
daycare centers, private clubs, fire stations, common areas in multi-family dwellings, nursing 
homes, food service locations, and institutional food service locations such as hospitals or 
correctional facilities.

This warranty is non-transferable and will not under any circumstance be extended based on 
the date of installation — the warranty period takes effect from the date of purchase and only 
covers the original purchaser. The warranty applies only to products installed in the contiguous 
United States and the District of Columbia. Failure to secure certified warranty service per 
these terms will result in a forfeiture of the remaining warranty. Out-of-pocket payments will not 
be reimbursed unless prior approval is received from ZLINE and/or ZLINE-certified service 
contract partners. Unapproved out-of-pocket payments for service will not be reimbursed. All 
warranty procedures must be followed to maintain warranty coverage.

Summary of Contents for RT30 Series
































Reviews: