14
Integr
ated P
anel Installation
INSTALLATION
INTEGRATED DOOR PANEL INSTALLATION INSTRUCTIONS
1. Remove the door from the unit as outlined in the steps on page 12.
2. By hand, remove the rubber door seal to access the panel mounting holes. Set the seal
aside and place the door face side up on a stable surface.
3. Place the panel onto the door and align the top be flush with the top of the door.
4. Adjust the overlap of the panel — panel width (23 5/8" or 600 mm) is slightly smaller
than the product (23 7/8" or 606 mm) — so it is equal on both sides of the door.
5. Secure the custom door panel to the door using 10 provided wood screws — 3 on each
side and 2 apiece at top and bottom — using a drill or screwdriver, using the precise
measurements provided on page 13.
6. Once installed, replace by hand the door seal. Be sure the seal is properly sealed.
7. Reinstall the door to the unit as outlined in the steps on page 12.
INTEGRATED DOOR PANEL DIMENSIONS
• Reference the dimensions below when fabricating your custom integrated panel.
• Figure 1 is a side view of the unit, showing how the panel (in gray) fits over the panel-
ready door. A panel depth of no more than 3/4" (19 mm) is recommended.
• Figure 2 shows a front view of a custom panel; follow these precise specifications when
cutting/fabricating the panel to perfectly align with the panel-ready door.
23 5/8" (600 mm)
18 5/8" (472 mm)
Depth of unit behind door:
20 11/16" (526 mm)
Depth of door: 1 3/4" (44 mm)
Recommended depth of
integrated door panel:
3/4" (20 mm)
30"31"
(762787 mm)
2 3/4" (70 mm)
2 3/4" (70 mm)
Full product height:
34"35"
(864889 mm)
3 3/4"
(95 mm)
30" (762 mm)
6 7/8" (175 mm)
21 1/4" (539 mm)
20 1/2
" (5
20 mm)
27
" (68
5 mm)
Figure 1
23 5/8" (600 mm)
18 5/8" (472 mm)
Depth of unit behind door:
20 11/16" (526 mm)
Depth of door: 1 3/4" (44 mm)
Recommended depth of
integrated door panel:
3/4" (20 mm)
30"31"
(762787 mm)
2 3/4" (70 mm)
2 3/4" (70 mm)
Full product height:
34"35"
(864889 mm)
3 3/4"
(95 mm)
30" (762 mm)
6 7/8" (175 mm)
21 1/4" (539 mm)
20 1/2
" (5
20 mm)
27
" (68
5 mm)
Figure 2
