23
WARNING
Make sure the appliance is fully disconnected from power before performing
any cleaning or maintenance to avoid risk of electric shock or injury.
CLEANING THE EXTERIOR
Clean the exterior stainless steel with a cloth dampened in mild soapy water. After cleaning,
dry thoroughly with a soft cloth and polish with a stainless steel cleaner. To clean the door
gasket, use only mild soapy water. Never use harsh cleansers or scouring pads to clean any
part of your unit.
CLEANING THE INSIDE
Remove any contents inside the refrigerator. Rinse the inside surfaces with plain water and
throughout dry the interior, including stainless steel racks and glass shelving. Avoid getting
excess water inside the machine since it will flow into the water trap near the compressor
and possibly overflow.
DEFROSTING THE UNIT
The unit uses an automatic defrost system in which the refrigerated surfaces of the unit defrost
automatically. Defrost water drains into a hole in the floor of the storage compartment and
is channeled into a drain pan located at the back of the unit near the compressor. Heat
transferred from the compressor evaporates any water that has collected in the pan. Be sure
the drain hole in the floor of the unit is clear and unobstructed.
START-UP AFTER LONG-TERM STORAGE:
1. If stored outside, it is recommended that the unit again be thoroughly inspected per
the storage instructions above to address any dirt or debris from the weather and/or
animals/insects.
2. Once fully cleaned, connect the unit to electrical power.
3. Turn unit on and confirm your desired control settings.
4. Allow 24 hours for the unit to stabilize before loading contents.
CARE AND MAINTENANCE
Car
e and Maintenance
