6
ZLINK Public
www.zlinkproducts.com
4.
Select ZL-100 to add your ZL-100 hub. You will be
requested to connect your ZL-100 to an USB port.
Note: ZL-100 is powered from any device having a 5 V
USB port. To turn ZL-100 on, plug it in the USB port of the
device connected to the power network. The blue LED
indicator shows that ZL-100 is on.
5.
At this point, switch to the Wi-Fi settings of your
smartphone to connect to ZL-100 via Wi-Fi.
Note: as soon as ZL-100 is powered up, it becomes a Wi-
Fi access point. It shows in the list of available Wi-Fi
networks under the ZL_XXXXXXXX name where XXXXXXXX
is ZL-100 serial number.
6.
Connect to ZL-100 using the following default password:
test4321. As soon as you are connected, ZL-100 will be no longer shown in the list of
available networks.