background image

 

12

erratically changing 
turns by itself.  

small changes in the supply voltage.  
When the batteries are drained or near 
drained, the clock might behave 
erratically from time to time changing 
turns by itself, and also the display 
will not be as bright as before. 
Replacing the batteries will return 
your unit to normal operation.  

Problem:

 I replaced the 

batteries but the clock is 
not working. The clock 
was working before the 
batteries replacement. 

Solution:

 Make sure that the batteries 

are installed in the proper polarity 
direction. There are some marks in 
the batteries holder that indicate the 
proper battery direction. Check the 
on/off slide switch. 

Problem:

 When playing 

a game the timing in the 
clock would not behave 
as expected.  

Solution:

 Make sure that the menu 

options for delay 

"DEL  00"

increment 

"INC  00"

, hourglass 

"HOGL  000"

, Scrabble 

"SCRA    

ON"

, score keeper 

"SCOR  ON"

byoyomi 

"BYO  YOMI"

,  and 

tournament modes 

"P-00  000"

 are 

all set to zero or off. 

Problem:

 There is no 

beeping sound coming 
out of the clock.  

Solution:

 Set the menu option for the 

sound from off 

"SOUN OFF"

 to on 

"SOUN ON"

. Refer to the "Set 

Sound to On/Off" procedure in your 
clock manual. 

Problem:

 The LED light 

indicators do not work. 

Solution:

 Set the menu option for the 

led indicators from off 

"LED OFF"

 

to on 

"LED ON"

. Refer to the "Set 

LED Indicators to On/Off" procedure 
in your clock manual. 

 

Summary of Contents for ZMF-II













Reviews: