p. 6/61
removable grate of the combustion chamber, allowing easy access and
ash cleaning;
photosensor, which gives information for the status of the combustion
process to the control unit and allows dynamic operation of the burner;
interface panel, equipped with light indicators;
the control board is equipped with led indicator for indicating the
status of adjustable parameters index value;
a variable potentiometer, which allows easy thermal capacity
adjustment;
color scale, used for manual synchronization of the air flow rate,
according to the thermal capacity of the burner;
reversible thermo sticker, indicating the operating mode of the system
and the requirement of ash deposition cleaning of the appliance and/or
the flue stack;
The burner is equipped with
automatic fuel ignition system;
automatic fuel transport system – from bunker to the combustion chamber
of the main unit;
safety system, which blocks its operation in case that at any circumstances
the fuel delivery pipe is preheated above certain temperature safety level;
photosensor, which allows dynamic monitoring of the combustion process
status;
transition system, which modulated the air supply fan operation at ignition
process;
color scale for easy manual adjustment of the air low control flap,
according to the thermal capacity of the burner;
Advantages of the burner
the burner automatically utilizes renewable energy source – biomass,
which makes it environmental friendly and does not contribute to the
global warming and pollution;
the burner is installed in order to apply the so called “fuel switch process”
for appliances, utilizing fossil fuels – diesel, natural gas, LPG, coal;
the burner’s design allows easy installation on manual fed boilers – such
as those, designed for coal, wood logs. The heating system and the
boiler/equipment however need minor redesign and reconstruction in
order to allow such fuel switch process;
