Pelletherm V.2 M01 4
1. USER SAFETY INFORMATION.
The operating instructions of the automated pellet hot-water boiler series "Pelletherm V.2
M01" is designed for users and authorized service specialists.
User needs to know the following:
All activities on the installation of the boiler may only be carried out by authorized
installers received rights for that from the competent authorities;
All work on the electrical installation should only be performed by electricians in
accordance with the regulations in force;
Initial technical commissioning, including a view of the performing the installation,
setup and commissioning of boiler operation must be performed by an authorized
representative of the manufacturer.
During installation, startup, setup and commissioning of pellet hot-water boiler series
"Pelletherm V.2 M01" the following must be observed:
All legal regulations for safety;
Provisions for environmental protection;
Provisions for installation, commissioning and setting;
Harmonised European Union provisions applicable in the country.
Please follow strictly the described safety instructions to prevent accidents and injury to
people and damage to property as well as damage and environmental pollution.
Please note the following symbols in this instruction:
Danger
This symbol warns the user of danger to man’s health.
Caution
This symbol alerts the user to the risk of damage to property and the
environment.
Information
This symbol gives the user additional information.
In the interest of your safety is to familiarize in detail and carefully with this
instruction before taking action on the installation and operation of this
equipment. Failure to follow these instructions may result in damage and fatal
consequences for which the company will not be held responsible.
In this manual is used the designation "Pelletherm V.2 M01" which provides
information about hot-water boilers "Pelletherm 30 V.2 M01", Pelletherm 45
V.2 M01”, "Pelletherm 60 V.2 M01", Pelletherm 80 V.2 M01" and "Pelletherm
100 V.2 M01".