1201-1205 ,Sangda Mansion, High Technology Park,
ShenZhen, Guangdong, China
Fax:
Tel: 0755-3363-1636
0755-3363-1639
SAFETY
PRECAUTIONS
CAUTION
1. Do not drop objects on the product or
apply strong
shock to it. Keep away from
a location subject to
excessive vibration
or magnetic interference.
2. Do not install in a location subject to
high
temperature (over 110F), low
temperature (below
0F), or high
humidity. Doing so may cause fire or
electric shock.
3. If you want to relocate the already
installed
product, be sure to turn off the
power and then
move or reinstall it.
4. Remove the power plug from the
outlet when then
there is a lightning.
Neglecting to do so may
cause
fire
or
damage
to
the
product
.
5. Keep out of direct sunlight and heat
radiation
sources. It may cause fire.
6. Install it in a place with good ventilation.
7. Avoid aiming the camera directly towards
extremely bright objects such as sun,
as this may
damage the CCD image
sensor.
8. Apparatus shall not be exposed to dripping or
splashing and no objects
filled with liquids, such as
vases, shall be placed on the apparatus.
9. The Mains plug is used as a disconnect
device and
shall stay readily operable at
any time.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE REAR COVER.
NO USER SERVICEABLE PARTS
INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
This symbol indicates high voltage
is present inside. It is
dangerous to
make any kind of contact with any
inside part
of this product.
This symbol alerts you that important
literature concerning
operation and
maintenance has been included with this
product.
WARNING
1. Be sure to use only the standard
adapter
that is
specified in the specification
sheet. Using any
other adapter could
cause fire, electrical shock, or
damage
to the product
2.
Incorrectly
connecting
the
power
supply or
replacing battery may cause
explosion, fire,
electric shock, or damage
to the product.
3.
Do not connect multiple cameras to a
single
adapter. Exceeding the capacity may cause
abnormal heat generation or
fire
.
4.
Securely
plug
the
power
cord
into
the
power
receptacle. Insecure connection
may cause fire.
5. When installing the camera, fasten it
securely and
firmly. A falling camera may
cause personal injury
6.
Do not place conductive objects (e.g.screwdrivers,
coins, metal things, etc.) or containers filled with
water on top of the
camera. Doing so may cause
personal
injury due to fire, electric shock, or falling
objects.
7.
Do not install the unit in humid, dusty, or
sooty
locations. Doing so may cause fire
or electric
shock.
8.
If any unusual smells or smoke come
from the unit,
stop using the product. In
such case, immediately
disconnect the
power source and contact the
service
center. Continued use in such a condition
may cause fire or electric shock.
9.
If this product fails to operate normally,
contact the
nearest service center. Never
attempt to modify
this product
in any way. (ZMODO
is
not
liable
for
problems caused by unauthorized
modifications or
attempted repair.)
10.
When cleaning, do not spray water directly onto
parts of the product. Doing so may cause fire or
electric shock.
1
