15
Alarm duration: the alarm duration for after chose the trigger video detection.
Area edit: setup the motion detection area by dragging left of mouse.
Alarm: “
☑
”means start, “
□
”means stop.
Buzzer: “
☑
”means start, “
□
”means stop.
E-Mail notice: “
☑
” means E-Mail valid, “
□
” means E-Mail invalid.
Copy to: select the channel
and click "copy to" & ''ok " to copy
the same setting to other channel. Or user can choose copy to "all" to make all channel in same stetting .
Click button "cancel", the setup information will be non-saved but exit.
3.8.3.7 PTZ setup
Select ”PTZ setup” from “system setup” menu
Channel: chose the target channel by clicking select box
Protocol: support Pelco-D and Pelco-P. Select the same protocol as PTZ.
Device ID: choose the matched one of the PTZ
Parity check: choose the matched one of the PTZ
Copy to: select the channel
and click "copy to" & ''ok " to copy
the same setting to other channel. Or user can choose copy to "all" to make all channel in same stetting.
Click button "cancel", the setup information will be non-saved but exit.
