4
13
MENU
Enter the main menu of setting interface
14
ESC
Return or exit operations
15
BACKUP Backup video files
16
CLEAR
Cancel alarm under alarm status
17
SEQ
One key for channel touring according to the touring settings;
Press to pause and restart while touring
18
1. preview mode: pop out playback interface;
2. playback mode: shift between play and pause
19
Playback mode: Stop play
20
Playback mode: fast rewind
21
Playback mode: fast forward
1.4 Installation & wiring
Hard Drive Installation
A Hard Disk Drive is not installed by the manufacturer unless the item is specifically purchased with a HDD.
The user may install a SATA HDD between 80GB and 2TB of storage after receiving.
Hard Drive Installation procedure
1. Open the NVR top cover while the NVR is unplugged from its power source, take out the damping
washers in the screw bag, and then put the 4 damping washers into the clamping slots (four protruding
steps) in the case;
2. Connect the SATA data cable and HDD power cord to HDD;
3. Lift up the hard drive with your hand, and turn over the case to make sure that the four holes at the bottom
of the case correspond to the hard drive mounting holes, and then fix the hard drive using four 4 M3*12
Head Screws plus plain washers;
4. Connect the SATA data cable and HDD power cord to the backplane;
5. Close the cover, and fix the case with screws.
Note1: Please select the video surveillance dedicated hard drive that recommended by the hard drive manufacturer, in order to
meet the requirements of long time & large amount of data read and write. Besides, please purchase from the official
channels to ensure the quality of the hard disk.
Note2: Please format HDD for the first use, or system will send error notification of “Hard disk error”accompany with audio
alarm.
Wiring Instruction
Connect to the Power Supply
You should first make sure that the AC voltage connected with the NVR power adapter matches with the
requirements. And then connect the power adapter to power input interface of NVR, the power indicator on
the front panel will light on, indicating the power is connected right.
Note: Please use the power adapter included in the package to avoid any damage to the equipment.
*Network Access
The device provides a standard RJ45 interface, which can easily access the LAN or WAN.
During the network connection, you should provide sufficient bandwidth to ensure the fluency and clarity of
the images transmitted over the network.
