VPLCE532E Vision Motion Controller User Manual V1.5
connected directly, but for hardware, adapter head is needed) to connect to ZDevelop.
➢
Please use the "ADDRESS" and "SETCOM" commands to set and view the protocol
station number and configured parameters, see "ZBasic Programming Manual" for
details.
➢
According to their respectively instructions, correctly set the relevant parameters of
the third-party equipment to match the parameters of each node.
➢
When all is configured, it can start to do communicating.
➢
Communication data of RS232 can be directly viewed through “ZDevelop / Controller
/ State the Controller / CommunicationInfo”.
3.4.
IN Digital Input & High-Speed Latch Port
The digital input adopts 3 groups of 10Pin screw-type pluggable terminals, and the
gap distance between terminals should be 3.81mm. In addition, the high-speed latch
function is integrated in digital input signals.
→
Terminal Definition
Terminal
Name
Type
Function 1
Function 2
EGND
/
IO public end
/
EGND
/
IO public end
/
IN0
NPN type,
high-speed
Input 0
High-speed
latch
IN1
Input 1
Summary of Contents for VPLC532E
Page 1: ......
Page 39: ...VPLCE532E Vision Motion Controller User Manual V1 5...
