ZMC304X/306X Hardware Manual Version1.3
1
Chapter I Introduction of Controllers
ZMC is the abbreviation of network motion controller published by ZMOTION
Technology. Zmotion motion controllers can be applied in any PC or offline areas.
ZMC controller supports linear interpolation of up to 12 axes, interpolation of linear,
random, spherical or helical, electronic cam, electronic gear, synchronous following,
virtual axis etc. Real-time motion control can be realized through optimized network
communication protocol.
One computer can link with up to 256 ZMC controllers.
1.1
Connection Configuration
Typical Connection Configuration
The controller supports Ethernet, USB, CAN,485 and other communication interfaces.
Input, output or axis can be extended through CAN bus. (Resistance of 120Ω is
required between CANH and CANL).
ZMC controller supports data saving or reading through USB Drive. (Except for
ZMC00X series)
.
