8
tightening torque of M8screw is 16-20N*M.
In the selection of clamp bolts and nuts, please pay attention to the size of aluminum frame
in advance.
The aluminum frame will restrict the fastening direction of screws. As shown below, the screw
cannot continue to be screwed downward. In this case, it is recommended to use the T-type cap.
Example B:C-type steel frame installation
ZNSHINE SOLAR AUSTRALIA PTY LTD. recommends using M8 bolt fixing clamp. The
tightening torque of M8screw is 16-20N*M.
In the selection of clamp bolts and nuts, please pay attention to the size of steel frame
in advance.
For C-type steel frame, a variety of schemes including T-type bolt are feasible in consideration
of the larger space inside steel frame section.
Note: Please consult ZNSHINE SOLAR engineer before the installation of frame lessclamp.
