Users Guide for Apple Mac OS Computers
4
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
About This Manual
This manual provides instructions to install the ZNYX NetBlaster
ZX312T-
MAC Ethernet adapter and the NetBlaster ZX345-MAC Fast Ethernet
adapter.
To install your ZNYX network adapter, you will need an Apple Macintosh
®
,
Motorola StarMax
or compatible with a PCI bus and Mac
OS (Apple System
7.5.2 or later). This manual assumes that you have a basic understanding of
your Macintosh or compatible (i.e. copying files, start-up procedures, etc.). If
terms like Control Panel or System Folder are unfamiliar to you, we
suggest you first become familiar with the owners manual supplied with your
computer system.
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
Unpacking
Examine the shipment to ensure each component has not been damaged by
shipping. Your package should contain the following:
1) ZNYX NetBlaster network adapter (ZX312T-MAC or ZX345-MAC)
2)
Installation for Mac OS
driver diskette
3)
ZNYX Users Guide
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
Precautions
Before commencing installation, observe these precautions:
1) Make sure that all power is turned off. Leave the computer plugged
into the wall socket to ensure proper grounding.
2) To minimize static electricity, avoid carpeted and low humidity areas.
Ground yourself by touching the chassis of your computer before
touching the motherboard. If you are using an anti-static wrist strap,
once you have opened the computer case, attach it to the metal chassis.
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
Quick Start
Installing your network adapter and software drivers is quite simple.
1) Turn your computer system off.
2) Install the adapter in your computer.
3) Connect cables from your adapter to the network.
4) Install the software driver.
5) Re-boot.
