9
2.5.3.
Store the cleaner and cable
-
Rinse the cleaner with clear water.
-
Store all the elements away from sunlight, humidity and bad weather.
•
Roll up the cable carefully. The cable must be carefully arranged for storage. Once rolled up, the cable can be placed
on a wall mount for example.
•
Store cleaner and all elements away from direct sunlight and any splashes.
3
Maintenance
To maintain the longest possible life of the robotic cleaner, we recommend to check all the
parts of the cleaner described in this chapter at least once a month.
To avoid serious injury:
•
Disconnect the cleaner from the power supply.
3.1.
Cleaning the cleaner
•
The appliance must be cleaned regularly using clean or slightly soapy water.
Do not use solvents.
•
Rinse the appliance thoroughly with clean water.
•
Do not let your appliance dry in the sun by the pool.
Tip:
To preserve the integrity of the cleaner and guarantee optimum performance:
- The filter and brush should be replaced every 2 years,
- Examine the wear indicator on the tracks and replace the tracks
as soon as the indicator is reached.
3.2.
Cleaning the filter
•
The cleaner's performance may be reduced if the filter is full or dirty.
•
Clean the filter with clean water after each cleaning cycle.
•
If the filter is blocked, clean it with an acid solution (spirit vinegar, for example). It is recommended that you do this at
least once a year, since the filter will clog if not used for several months (winterising period).
EN
Summary of Contents for AquaSphere ASR 105
Page 2: ......
