FLOWKEEPER™ VALVE
FOR POOLS WITH A SINGLE SKIMMER ONLY
The pool pump provides more gallon per minute flow than
your G3 requires. That's why we provide a way to regulate the
flow. The Flowkeeper Valve is self adjusting and provides a
by-pass, so that the pool pump and the G3 run properly. In
single skimmer installations the Flowkeeper Valve MUST BE
used. Installations in a vac line or a second skimmer do not
require the flowkeeper.
Skimming action is maintained through a bypass throat in the
valve. As the filter collects debris, the valve automatically
maintains the correct flow to the cleaner. The Flowkeeper valve comes preset at the two (2) setting. The
lower the number, the lower the flow to the cleaner head. Should readjustment become necessary, pull
the adjustment handle to raise or lower the setting. There are three total setting options.
INSTALLATION (A)
FOR POOLS WITH ONE SKIMMER
ASSEMBLY
FINNED DISC INSTALLATION
Bottom View
Slide the finned disc over the foot pad. Be sure it fits properly in the grooves provided.
The fins on the disc face upward.
Rear View
6
To adjust setting,
pull and move to
desired setting.
The next steps vary based on whether your pool has one
skimmer, two skimmers or a wall vacuum fitting. Please
follow the appropriate instructions for your type of pool.
