3.
Hold the cleaner vertically over the pool surface
to drain water before removing (Figure 6).
3
Figure 6.
Lift Cleaner From Pool with Handle
CAUTION
Use care and correct lifting technique when lifting
heavy objects. Incorrect removal of the cleaner from
the pool can cause muscle strain or back injury.
3.5
Rinsing the Cleaner
Rinse the cleaner after every cleaning cycle. Use
slightly soapy clean water, then rinse generously with
clean water. Do not use solvents such as acetone or its
equivalent. Do not let your cleaner dry in direct sunlight
near the pool.
3.6
Cleaning the Filter Canister
WARNING
To avoid electric shock and other hazards which
could result in permanent injury or death, disconnect
(unplug) the control box from the power source
before performing any cleaning and maintenance.
1.
Unplug the fl oating cable at the Control box.
Unplug the Control box from the power source.
2.
Press the Push 'n' Go button (1) to release the
fi lter canister handle (2) (Figure 7).
Figure 7.
Release Filter Canister Handle
1
2
8
H0446500_REVB
Summary of Contents for CyclonX EM14 Series
Page 15: ...NOTES 15 H0446500_REVB ...
