Congratulations on the purchase of your new Zodiac
®
MX™ 8 automatic pool cleaner. Manufactured using
proven Zodiac
®
technology, the Zodiac
®
MX
TM
8 is designed and manufactured for easy installation, and
years of carefree operation. Before installing the cleaner, please take a few moments to become familiar
with its components and to review the items listed under Important Information.
Like most mechanical devices, the Zodiac
®
MX
TM
8 requires periodic adjustments, routine maintenance, and the
replacement of certain hardworking parts. Be sure to have the Zodiac
®
MX
TM
8 checked occasionally by
your local Zodiac
®
dealer.
Always insist on genuine Zodiac
®
replacement parts. Non-Zodiac
®
parts are not made to our specifications.
They may have an adverse effect on the operation of your Zodiac
®
MX
TM
8 or may even damage it.
Remark:
If your pool is fitted with a variable speed filtration pump it is essential that you set it to its maximum
power when using your hydraulic suction cleaner in order to ensure an optimal operating flow. If necessary use
the flow tester supplied with the cleaner.
Zodiac
®
MX
TM
8 Complete Cleaner
1. Cleaner Body
2. Automatic Flow Adjustment™ Valve
3. Valve Cuff
4. Twist-Lock 45 Degree Elbow Extended
5. Flow Gauge
6. Quick Connector
7. Hose Float
8. 45 Degree Elbow
9. Twist-Lock Hose Section (12 x 1 m)
11
0 1
2 3
4
5
6
6 5 4 3 2 1 0
10
1
2
5
6
7
4
3
8
9
Introduction
Read owner’s manual
completely before
operating the cleaner.
Remove cleaner before
entering the pool.
Do not operate
outside of the pool.
Do not let children play
with cleaner.
Installation
Prepare the Pool
1. Manually vacuum the pool, and make sure the pool filter and pump basket are clean.
2. Close the pool main drain line.
3. Aim the return line fittings downwards.
EN
