4
English
Installation
Prepare the Pool
Inspect the interior of the pool. If the liner is brittle, has wrinkles, root or metal corrosion from the
underside, or damage to the supporting base or walls, do not install the cleaner until a qualified
professional makes any necessary repairs.
1. Manually vacuum the pool if excessive debris is present
and make sure the pool filter and pump basket are clean.
2. Adjust the return lines to blow
downward to break up surface
circulation and ensure complete
cleaning coverage.
• Loosen the fitting lock ring
• Redirect the eyeball downward
• Retighten the lock
If the return fitting cannot be adjusted,
the fitting must be replaced with a ZPS
return line diverter (part #W90153 for 1-1/2”,
#W90155 for 2” or #W24100 for pools without
return fittings) .
Assemble the Cleaner
Stretch the combi disc over the base of the
cleaner with the fins of the disc facing up.
The disc should fit securely in the groove
provided and rotate freely.
Assemble the Hose
Connect enough hose to reach the farthest point of the pool and then add one more section.
Depending on the pool size, all sections may not be needed or additional sections may be required.
1 Hose
Section
Skimmer
Skimmer
1 Hose
Section
1
2
3
