16
97206
DECEMBER 2, 2003 (Round Pool - 1" Rims)
BE SURE:
Follow all safety instructions in the special safety section packed with these assembly instructions.
It is important to follow necessary health regulations concerning chlorination, circulation, and cleaning of your pool. This
may be done by using a filter and the proper chemical treatment procedures. Your pool dealer has a complete line of filters
and accessories with complete instructions on their use. For further information on care, maintenance, and winterization
of your pool, refer to pool care booklet. Be sure to follow all safety instructions in same booklet. Preserve the finish of your
pool frame by waxing it at least twice a year.
Step 13.
INSTALL LEDGE COVERS
FIG. 25
a. Set inner ledge cover over top ledges. Slide tab of outer ledge
cover into the slot on uprights.
b. Slide outer ledge cover over the inner cover for a snug fit.
c. Using hole in outer cover as a guide. Fasten ledge cover
assembly to the top plate with a 1-1/2" Phillips Flat Head
sheet metal screw, and place screw cover over the screw.
UPRIGHT
TOP LEDGE
1-1/2" PHILLIPS
FLAT HEAD
SHEET METAL
SCREW
OUTER
LEDGE
COVER
FIG. 26
slot in
upright
INNER
LEDGE
COVER
Follow assembly
procedures appearing
with the picture of your
ledge cover. (FIG. 27)
