background image

2

CONTENTS

❶ Specifi cati ons 

3

1.1 I  Descripti on 

3

1.2 I  Technical specifi cati ons and marking 

5

❷ Installati on 

6

2.1 I  Set-up 

6

2.2 I  Att achment to the base or caddy assembly (depending on model) 

6

❸ Use 

8

3.1 I  Operati ng principle 

8

3.2 I  Pool preparati on 

8

3.3 Immersing the cleaner 

8

3.4 I  Electricity supply connecti ons 

9

3.5 I  Starti ng the cleaning cycle 

10

3.6 I  Ending the cleaning cycle 

11

3.7 I  Setti  ng the ti me and programming the cleaning cycles (depending on the model) 

12

3.8 I  The remote control (depending on the model) 

14

❹ Maintenance 

15

4.1 I  Cleaning the fi lter 

15

4.2 I  Cleaning the propeller 

16

4.3 I  Replacing the brushes 

17

4.4 I  Changing the tyres 

18

❺ Troubleshooti ng 

19

5.1 I  Appliance behaviour 

19

5.2 I  User alerts 

20

5.3 I  Pre-diagnosti c menu (depending on the model) 

21

• 

Before handling the appliance, it is vital that you read this installati on and user manual, as 

well as the "warnings and warranty" booklet delivered with the appliance. Failure to do so 

may result in material damage or serious or fatal injury and will void the warranty.

• 

Keep and pass on these documents for later consultati on during the appliance's service life.

• 

The  distributi on  or  modifi cati on  of  this  document  in  any  way  is  prohibited,  without  prior 

authorisati on from Zodiac®.

• 

Zodiac®  is  constantly  developing  its  products  to  improve  their  quality.  The  informati on 

contained herein may therefore be modifi ed without noti ce. 

Tip: to make it easier to contact your retailer

Write  down  your  retailer's  contact  details  to  help  you  fi nd  them  more  easily  and  fi ll  in  the  "product" 

informati on on the back of the manual; your retailer will ask you for this informati on.

EN

Summary of Contents for Vortex OV 3300
























Reviews: