H0491600.B EN - 2014/11
11
• Roll the brush around its support and slide the tabs into the fixing holes (3).
•
Pull on the end of each tab
(4) until its edge passes through the slit.
•
Cut the tabs using a pair of scissors so that they are level with the other blades
(5)
1
2
5
4
3
We recommend that you change the brushes and filter support after 2 seasons usage to preserve the integrity
of the cleaner and guarantee optimum performance.
7.3 Changing the tyres
1
2
3
4
7.4 Maintenance of your cleaner
•
The cleaner must be cleaned regularly using clean or slightly soapy water, do not use solvents
such as trichloroethylene or equivalent. Rinse the cleaner generously using clean water. Do
not let your cleaner dry in the sun by the pool.
• The cleaner must be stored on the caddy provided for this use so that it dries quickly.
•
Wind the cable around the hooks.
7.5 Recycling
This symbol means that your cleaner must not be thrown into a normal bin. It will be
selectively collected for the purpose of reuse, recycling or creating value. If it contains any substances that may be
harmful to the environment, these will be eliminated or neutralised.
Contact your dealer for recycling information.
Do not throw the spent batteries into the domestic waste. Place them in a collection point or approved centre for recy-
cling.
8. Troubleshooting
8.1
"Control indicator" LED flashes (OV 3300 - OV 3400 - RV 4310 - RV 4400 - RV 4460)
If the
LED is off, the cleaner is operating normally.
•
If the
LED is flashing, the cleaner is indicating that checks must be carried out to improve cleaning and/or resolve
an error. See the table below.
8.2
Error codes (OV 3500 - RV 4550 - RV 5400 - RV 5470 - RV 5500)
• Pressing a key deletes the error code and turns off the control box.
• The screen switches to standby after 10 minutes. To turn the screen back on, just press any key.
•
When an error is detected, the control box temporarily suspends the programme (the
LED is turned off). Press
and hold the
key to revalidate the current programming.
