6
PROPER HOSE ASSEMBLY ORDER
FIGURE 1
Wall Adapter
Star Control
®
Hose Float
First hose section from the cleaner
head receives 2 hose floats
Second hose
section from the
cleaner head
receives no
hose floats
2’ Hose Section
Hose Float
Hose Float
Step 6:
Thread the head connector that is attached to the first hose section onto the cleaner head.
Head
Connector
Step 7:
Submerge the ZIPPY
®
head in the pool, tilt it on its side and wiggle it back and forth until
the air is evacuated and bubbles cease. Then, lower the ZIPPY to the bottom of the pool.
Step 5:
In proper order, connect the number of 5 ft. hose sections needed for your pool to the Star
Control Assembly. Hose and hose floats must be assembled as shown below for Zippy to
perform properly.
