Step 8:
Position the top half over the bottom
and twist until it locks in place. Connect
the hoses to the Zippy head.
Step 9:
Submerge and tilt the head to the side to
remove bubbles and lower it to the pool
bottom.
Turn the pump on.
9
CARE AND MAINTENANCE
Your ZIPPY
®
was designed to require very little maintenance. When adding chemicals, especially when
super chlorinating or shocking the pool, remove the unit and hose by unthreading the Wall Adapter
Assembly from the wall. Reinstall it in the pool a minimum of 4 hours later.
VERY IMPORTANT!
Backwashing Your Filter System
It is important to disconnect the ZIPPY when backwashing your pool filter system. Turn the Wall
Adapter counter-clockwise to remove it from the pool wall fitting. Reinstall after the backwashing
process is complete.
NOTE:
The filter must be operating for a minimum of 3 minutes to ensure that any suspended material
is flushed out before reinstalling ZIPPY.
