6
Caution
: Read all the instructions provided in this user guide and practice the testing procedures before using the AlphaTrak 3 meter. Blood glucose monitoring
should be done with the guidance of a veterinarian/veterinary surgeon.
Setting Up the AlphaTrak 3 Meter
The purpose of this section is to set the meter sound volume, time, date, units and Bluetooth connection.
1. With the meter off (no test strip inserted), press and hold m for 3 seconds until SET appears.
2. Press m to bypass setting the optional reminder alarms. You may choose to set these later (see Setting
Reminder Alarms section).
Set Sound Volume
Note: With the sound volume on, the meter will
beep when:
• The test strip is full of blood
• The test result appears on the display
• An error occurs
You may also choose to silence the meter
3. Set sound volume:
If you prefer:
Press c until you see
Then:
