５
※When pressing
briefly
, the device will Pause the timer,
pressing the button again will Resume the treatment.
※While in treatment, add the gel if your feel skin gets dry.
※When feeling hot, please continue to apply a little bit more of the gel.
If you still feel hot, please do not force with using the device on the same
area. You may continue using the device on a different part of the skin.
※While in treatment, if a different mode is selected, then power level turns
0, and the timer will restart at 3 minutes again.
〜
14
Please select level 1 for the first time users and with sensitive skins
and adjust the power level according to the state of the skin.
Adjust EMS level 1 to 5 by pressing . As pressing from
status, it shows and starts radio frequency treatment.
RF+
high frquency
(90kHz)
Stand-by state
※Automatically turns off with
Beep after 3 minutes.
RF+
high frquency
EMS
Refer to “Treatment” on P.18-21, slowly slide the device along
the skin for 3 minutes.
Finish treatment
After continuous use of 3 minutes, a beeps can be heard in
succession to indicate the end of the treatment.
To end the treatment, press and hold on to power-off.
Should you wish to continue treatment on other parts, please
apply the gel on the skin on those parts and repeat steps
2 4
※It automatically turns off with Beep-Beep-Beep when 3 minutes untouched.
