14
Do’s and Don’ts
Safety Notes
When the indoor humidity is too high, condensed water will be generated on the air quality sensor. Even
though the air quality is very good, the status lamp on the panel will indicate the air quality is bad and will
suggest you select the wind volume manually.
Don’t touch the power plug
with wet hands.
Ensure the power is switched off
before cleaning the purifier.
Don’t use power in any other form; AC
220V 50Hz is the only type of power
that can be utilized for this product.
Don’t open the frame and repair this
product by yourself; repairs should be
done by professional repair people.
Don’t pour water, liquid or flammable
detergent into the product to avoid
product damage or fire caused by
electric shock.
Don’t wash the mainframe with
solvent and chemical liquid to avoid
corrosion on frame.
Don’t put your hands or any objects in
the wind outlet.
Don’t pull the power cable to switch
off; the power should be switched off
safely by holding the plug end and
removing.
When the purifier is working, please
allow 8″ on the backside of the
machine from the walls and allow 12″
space on both sides. Please place this
product on a dry and stable plane for
use and do not use near heat sources
and overly humid locations.
When it’s not used for a long time,
please unplug the unit.
Do not allow children to touch and use
this purifier.
The air flow should be kept clear; don’t
let dust, cotton fiber, hair or other
materials block the wind inlet.
