7
How to Use
Installing the Filter (cont.)
2. Installing the filter and covers
A. There are differences
between the inside and
the outside of the dust
filter. Note: The side
with a handle should be
placed outwards.
1. Connect the power
For the first time use, take out the product from the packaging, remove the power cable tie, and insert the
plug into the socket. After the unit is connected to power, the key icon on the panel will turn red.
Lightly touch on the power key . The machine will start with a chord ringtone, power key will turn
green and the machine will enter an automatic mode. Meanwhile, the machine front panel will
display in white lamp simultaneously: (Automatic mode) AUTO.
B. There are differences
between the inside and
the outside of the front
filter. Note: The side with a
handle should be placed
outwards.
C. Install the front & rear
covers. The machine will
not run if the covers are
not in place.