background image

(2) Short press the SET button again, and it becomes ECO or HH mode: 

--Short press "+" or "-" button to choose ECO (energy-saving mode) or HH (fast cooling mode).   

--The original set by factory is HH. 

 

(3) Short press the SET button to choose the function of switch between Celsius and Fahrenheit. When you find this 

function, please short press"+" once or twice to choose Celsius or Fahrenheit. 

 

NOTE: 

If there is not any press on SET button for 10 second, the refrigerator will exit advanced parameter mode 

automatically.

 

 

3

+

Button

  for increasing the temperature setting

or There are other settings described above. 

4

-

Button

  for decreasing the temperature setting

or There are other settings described above. 

 

--After  you  press  ON/OFF  button,  you  can  set  the  temperature  range  from  -25

to  2

.  Short  press  "+"  and  "-" 

button, or long press "+" and "-" button to adjust the temperature. 

--When  the  refrigerator  is  on,  press  ON/OFF  button  and  "-"  button  meanwhile  for  5  seconds,  then  the  machine 

enters the temperature calibration mode, and the temperature can be adjusted at range of -5

  to 5

℃. 

 

5

Power ” indicator:

   

--When the refrigerator works, the light is red.   

--The refrigerator stops working and the light goes out. 

--When the refrigerator works in the ECO mode, the light is green. 

 

6

Error” indicator:

 Fault alarm 

--If there is a failure, the buzzer will ring continuously.   

--the screen will show the fault codes.   

--the failure indicator will be on in blue. 

 

7. LED display: 

shows

 

--Display the temperature and other settings. 

--the screen will show the fault codes. 

--with codes as below: 

F1: Voltage failure 

F2: Fan current failure 

F3: Compressor starting failure 

F4: Minimum speed failure of compressor 

F5: Controller temperature fault 

E0: Broken sensor circuit   

E1: Sensor short circuit 

NOTE:

 The system is abnormal, check first if the battery voltage is right. If the battery voltage is right, then wait 

3 minutes before you switch on the refrigerator.    If the system is still abnormal when you restart the machine, 

then call the after service for help. 

 

kindly reminder: 

Common temperature setting

 

Red  wine storage    (10

),  Vaccine,  Insulin (2

-  8

),  Fruit  (4

-  6

), Beverage (2

-  5

),  Meat  (-10

), 

Ice cream (-15

); Please be careful if you want to store drugs in the refrigerator. 

 

Summary of Contents for JK-B-50D










Reviews: