28
ZOLL AED 3 Operator’s Manual
Transferring Patient Data
Overview
In order to transfer data, the AED must be in AED Management Mode.
To enter AED Management Mode, press and hold the On/Off button for
at least 5 seconds, then press the Device Configuration icon on the main
display screen. While the unit is in AED Management Mode, you can
export data at any time to a USB flash drive or a wireless access point.
The ZOLL AED 3 defibrillator automatically stores patient clinical data
with date and time notation. You can access this data and transfer it to
a remote device (such as a computer) using either a USB flash drive or
a wireless connection. You can then view and analyze this information
using ZOLL RescueNet
®
Code Review software or ZOLL RescueNet Case
Review software through ZOLL Online.
NOTE
The AED retains the clinical event data even when powered off
or when the battery pack is removed. When the AED is powered
on and defibrillation pads are attached to a new patient, new
clinical data replaces the old clinical data if the AED has already
stored data for one or two patients (default is two).
Exporting Patient Files
Use the following procedure to transfer patient files (clinical data) from
the ZOLL AED 3 defibrillator.
NOTE
You do not need Supervisor access to export data files to a USB
flash drive or wireless access point.
NOTE
When transferring files via USB, the USB flash drive must be
USB 1.1 or 2.0 compliant.
Device
Configuration
icon
Summary of Contents for AED 3
